Revision 7T · Full Tutorial Edition · Updated 1 September 2026
PWR-005 · SUPERVISED full tutorial
Repeat a fixed submaximal strength task without hiding form loss
Strength endurance is the ability to preserve force and execution across repeated or sustained muscular work. This lesson teaches a provider-set repetition test with one load, range, cadence and termination rule. The learner completes each repetition to the same standard and stops at the first technical failure; the provider chooses the load, number of attempts, rest and progression.
What you will produceThe learner completes a supervised sit-to-stand repetition set at a fixed cadence and stops on the first missed range or cadence, with valid repetitions and technique decrement recorded.
Method7 numbered Power-specific steps
Practice authorityFull method with qualified supervision where stated
Full step-by-step individual tutorial · TLU-PWR-005
The learner completes a supervised sit-to-stand repetition set at a fixed cadence and stops on the first missed range or cadence, with valid repetitions and technique decrement recorded.
Practise the repetition standard and cadence without added load.
Perform a provider-set submaximal set while counting only repetitions that meet the rule.
Stop voluntarily before failure and report local fatigue separately from breathlessness or pain.
Qualified help is required for
Select the task, relative load, cadence, range, cap and recovery after assessment.
Decide whether repeated-fatigue testing is appropriate and observe the termination rule.
Set progression and distinguish local muscular endurance from cardiorespiratory limitation.
Never do this from the page alone
Run an exhaustion, repeated-failure or maximum-repetition test alone.
Speed up, shorten the range or bounce to inflate the count.
Continue after the first provider-defined technical failure, pain, dizziness or unsafe breathlessness.
2 · Get ready
Gather what you need and check the starting conditions
What you need
Stable armless chair fixed against a wall or provider-selected resistance station
Metronome or recorded cadence
Repetition-validity checklist
Session log for valid reps, error type, fatigue and recovery
Before you start
Agree on the exact start and finish positions and whether hands or aids are allowed.
Set the cadence, load, maximum set length and first-failure stop rule in writing.
Complete the provider's warm-up and verify that the chair or device cannot move.
Distinguish expected local effort from pain, dizziness, chest symptoms or unusual breathlessness.
3 · The method
Follow these steps in order
Define one valid repetition
From the same seated start, stand to the declared hip and knee extension, then sit under control until the chair supports you. Use only the agreed hand support.
Why: A repetition count is meaningless if the movement standard drifts.
Check: Learner and provider score the same two demonstrations as valid or invalid.
Lock the cadence
Start on the metronome and match one stand and one sit to the agreed beats. Do not begin ahead of the first cue.
Why: Cadence changes time under tension and fatigue.
Check: The first three repetitions land on the intended beats.
Keep the range constant
Reach the same standing marker and controlled seat contact each time; do not hover above the chair or drop onto it.
Why: Shortening the range can disguise fatigue.
Check: Each repetition meets both range markers.
Breathe and keep the task local
Breathe throughout and keep feet in the marked position. Tell the provider if breathlessness, pain or balance rather than local leg fatigue is limiting the set.
Why: Different limiting systems require different interpretation.
Check: The learner can name what caused the stop.
Stop at first technical failure
End the set when one repetition misses cadence, range, control or permitted support, even if another repetition might be forced.
Why: The endpoint is loss of declared performance, not collapse.
Check: No unscored extra repetitions occur after the first failure.
Record the valid count and decrement
Write the number of valid repetitions, elapsed time, first error, perceived local effort and time until ordinary breathing returns.
Why: The first error explains how endurance failed.
Check: The log shows the count and the exact stop reason.
Retest only in the same configuration
Use the same chair height, foot marks, cadence, hand rule and provider-set load. Treat any change as a new test.
Why: Otherwise a higher count may come from an easier fixture.
Check: Both session records match on every declared configuration field.
4 · Worked example
See the whole method used once
Scenario
A provider uses a 45-cm chair, arms folded, feet on tape marks and a 3-second stand-sit cycle with a 12-repetition cap.
Walkthrough
The learner and provider score two practice repetitions against the range and cadence rule.
The learner begins on the metronome and completes eight valid repetitions.
Repetition nine reaches standing late but still within the provider's tolerance and is valid.
Repetition ten ends with an uncontrolled drop to the chair, so the set stops immediately.
The log records nine valid repetitions, first failure 'uncontrolled descent', local leg effort 7/10 and normal breathing after 70 seconds.
Result
The score is nine valid repetitions in this chair-and-cadence configuration. It is not ten, and it does not prove occupational endurance or aerobic fitness.
5 · Right and wrong
Compare correct or safer execution with the common wrong version
Right and wrong comparison
Moment
Right / safer
Wrong / riskier
Why it matters
Counting: Strength endurance checkpoint
Count only repetitions meeting range, cadence and support rules.
Count every attempt that ends upright.
Invalid repetitions inflate endurance. That changes valid repetitions or sustained time at a fixed submaximal task before the first technical failure. It is no longer the same test.
Responding to fatigue
Stop at the first missed execution rule.
Use momentum and shortened range to keep going.
Compensation changes the task. That changes valid repetitions or sustained time at a fixed submaximal task before the first technical failure. It is no longer the same test.
Pacing: Strength endurance checkpoint
Follow the fixed cadence from the first repetition.
Rush early and slow down later.
Variable cadence changes the dose. That changes valid repetitions or sustained time at a fixed submaximal task before the first technical failure. It is no longer the same test.
Naming the limiter
Separate local fatigue, breathlessness, pain and balance.
Call every stop 'muscle fatigue'; it breaks the 'Breathe and keep the task local' execution rule.
The cause changes what the score means.
Retesting: Strength endurance checkpoint
Match chair, foot marks, cadence and hand use.
Use a higher chair and claim improvement.
An easier configuration is not a clean retest.
6 · Common mistakes
Spot the error and apply the correction
Common mistakes and corrections
Mistake
Fix
The endpoint is vague 'until tired'.
Predeclare the first missed range, cadence, control or support rule as the endpoint.
The learner speeds up to build a larger count.
Use an audible metronome and invalidate out-of-tolerance repetitions.
Later repetitions use less range.
Use visible standing and seat-contact markers and stop on the first miss.
An invalid final repetition is counted.
Record only completed valid repetitions and name the first failure separately.
The count is called aerobic endurance.
Record local muscular performance and any cardiorespiratory symptoms as separate outcomes.
7 · Practice
Turn the steps into a usable skill
First session
Provider defines and demonstrates one valid repetition.
Practise cadence for four unloaded or assisted repetitions.
Rest fully and complete one submaximal familiarisation set below the cap.
After recovery, complete one scored set using the first-failure rule.
Review the first error and rehearse one corrected repetition only if authorised.
Repeat plan
The provider sets frequency, load, repetition cap, sets and recovery. Repeated-failure training is not supplied. Retest only after recovery and only in the identical configuration.
Progress when
Every counted repetition meets range, cadence and support rules.
The first-failure point improves without a new compensation.
Local fatigue and recovery remain within the provider's agreed range.
Do not progress when
The count rises only because cadence, chair height, range or hand support changed.
Pain, balance loss or cardiorespiratory symptoms end the set.
Technique deteriorates earlier across sessions or recovery is incomplete.
8 · Check the result
Measure what changed
Valid repetitions or sustained time at a fixed submaximal task before the first technical failure
How: Declare load, chair or device, range, cadence, support, repetition cap and stop rule; record valid reps, first error, local effort and recovery.
Good result: The valid count or time improves in the same configuration without earlier form loss, worse symptoms or longer problematic recovery.
This does not prove: It does not prove maximal strength, aerobic fitness, occupational endurance or safety under prolonged work.
Self-check
Can you demonstrate and score one valid repetition?
What exact event ends the set?
Did you count the failed repetition? The correct answer is no.
Can you state whether local fatigue, breathlessness, pain or balance caused the stop?
9 · Stop, adapt or get help
Keep the safety boundary practical
Stop and get help
Stop immediately for chest pain, faintness, severe dizziness, unusual breathlessness or a new neurological symptom.
Stop the set for sharp or increasing pain, balance loss, uncontrolled descent or failure of the chair/device.
Seek provider review when recovery is unexpectedly prolonged or symptoms worsen after the session.
Accessibility and adaptations
Keep authorised hand support, mobility aids or a higher stable chair and record them as part of the configuration.
Use visual or haptic cadence cues when sound is inaccessible.
Use a provider-selected single-limb or upper-limb task if sit-to-stand does not match the learner's function; do not compare unlike tasks.
10 · Evidence and limits
Why these instructions are here
primary research
High-repetition training produces task-specific endurance adaptations that differ from maximal-strength adaptations.
Gerson E. R. Campos; Thomas J. Luecke; Heather K. Wendeln; Kumika Toma; Fredrick C. Hagerman; Thomas F. Murray; Kerry E. Ragg; Nicholas A. Ratamess; William J. Kraemer; Robert S. Staron · 2002 · Primary research
Progress is saved only in this browser on this device.
Step-by-step learner mode
Each activity includes its success check, a nearby accessible alternative and an “I’m stuck” correction path. Alternatives preserve the target where possible; when they change the task, Titan labels them as related rather than equivalent.
01
Define one valid repetition
From the same seated start, stand to the declared hip and knee extension, then sit under control until the chair supports you. Use only the agreed hand support.
Why this step exists
A repetition count is meaningless if the movement standard drifts.
Success check
Learner and provider score the same two demonstrations as valid or invalid.
I’m stuck on this step
Reset: Re-read this authored instruction — “From the same seated start, stand to the declared hip and knee extension, then sit under control until the chair supports you. Use only the agreed hand support.” — and its success check, then attempt only this step.
Possible snag: The result from “From the same seated start, stand to the declared hip and knee extension, then sit under control until the chair supports you. Use only the agreed hand support.” does not yet meet this declared check: Learner and provider score the same two demonstrations as valid or invalid.
Correction: Return to the start of “Define one valid repetition”, reduce complexity or pace, and repeat only the part needed to satisfy: “Learner and provider score the same two demonstrations as valid or invalid.”
Stop / get help: Stop immediately for chest pain, faintness, severe dizziness, unusual breathlessness or a new neurological symptom.
02
Lock the cadence
Start on the metronome and match one stand and one sit to the agreed beats. Do not begin ahead of the first cue.
Why this step exists
Cadence changes time under tension and fatigue.
Success check
The first three repetitions land on the intended beats.
I’m stuck on this step
Reset: Re-read this authored instruction — “Start on the metronome and match one stand and one sit to the agreed beats. Do not begin ahead of the first cue.” — and its success check, then attempt only this step.
Possible snag: The result from “Start on the metronome and match one stand and one sit to the agreed beats. Do not begin ahead of the first cue.” does not yet meet this declared check: The first three repetitions land on the intended beats.
Correction: Return to the start of “Lock the cadence”, reduce complexity or pace, and repeat only the part needed to satisfy: “The first three repetitions land on the intended beats.”
Stop / get help: Stop immediately for chest pain, faintness, severe dizziness, unusual breathlessness or a new neurological symptom.
03
Keep the range constant
Reach the same standing marker and controlled seat contact each time; do not hover above the chair or drop onto it.
Why this step exists
Shortening the range can disguise fatigue.
Success check
Each repetition meets both range markers.
I’m stuck on this step
Reset: Re-read this authored instruction — “Reach the same standing marker and controlled seat contact each time; do not hover above the chair or drop onto it.” — and its success check, then attempt only this step.
Possible snag: Later repetitions use less range.
Correction: Use visible standing and seat-contact markers and stop on the first miss.
Stop / get help: Stop immediately for chest pain, faintness, severe dizziness, unusual breathlessness or a new neurological symptom.
04
Breathe and keep the task local
Breathe throughout and keep feet in the marked position. Tell the provider if breathlessness, pain or balance rather than local leg fatigue is limiting the set.
Why this step exists
Different limiting systems require different interpretation.
Success check
The learner can name what caused the stop.
I’m stuck on this step
Reset: Re-read this authored instruction — “Breathe throughout and keep feet in the marked position. Tell the provider if breathlessness, pain or balance rather than local leg fatigue is limiting the set.” — and its success check, then attempt only this step.
Possible snag: The result from “Breathe throughout and keep feet in the marked position. Tell the provider if breathlessness, pain or balance rather than local leg fatigue is limiting the set.” does not yet meet this declared check: The learner can name what caused the stop.
Correction: Return to the start of “Breathe and keep the task local”, reduce complexity or pace, and repeat only the part needed to satisfy: “The learner can name what caused the stop.”
Stop / get help: Stop immediately for chest pain, faintness, severe dizziness, unusual breathlessness or a new neurological symptom.
05
Stop at first technical failure
End the set when one repetition misses cadence, range, control or permitted support, even if another repetition might be forced.
Why this step exists
The endpoint is loss of declared performance, not collapse.
Success check
No unscored extra repetitions occur after the first failure.
I’m stuck on this step
Reset: Re-read this authored instruction — “End the set when one repetition misses cadence, range, control or permitted support, even if another repetition might be forced.” — and its success check, then attempt only this step.
Possible snag: The endpoint is vague 'until tired'.
Correction: Predeclare the first missed range, cadence, control or support rule as the endpoint.
Stop / get help: Stop immediately for chest pain, faintness, severe dizziness, unusual breathlessness or a new neurological symptom.
06
Record the valid count and decrement
Write the number of valid repetitions, elapsed time, first error, perceived local effort and time until ordinary breathing returns.
Why this step exists
The first error explains how endurance failed.
Success check
The log shows the count and the exact stop reason.
I’m stuck on this step
Reset: Re-read this authored instruction — “Write the number of valid repetitions, elapsed time, first error, perceived local effort and time until ordinary breathing returns.” — and its success check, then attempt only this step.
Possible snag: The learner speeds up to build a larger count.
Correction: Use an audible metronome and invalidate out-of-tolerance repetitions.
Possible snag: An invalid final repetition is counted.
Correction: Record only completed valid repetitions and name the first failure separately.
Possible snag: The count is called aerobic endurance.
Correction: Record local muscular performance and any cardiorespiratory symptoms as separate outcomes.
Stop / get help: Stop immediately for chest pain, faintness, severe dizziness, unusual breathlessness or a new neurological symptom.
07
Retest only in the same configuration
Use the same chair height, foot marks, cadence, hand rule and provider-set load. Treat any change as a new test.
Why this step exists
Otherwise a higher count may come from an easier fixture.
Success check
Both session records match on every declared configuration field.
I’m stuck on this step
Reset: Re-read this authored instruction — “Use the same chair height, foot marks, cadence, hand rule and provider-set load. Treat any change as a new test.” — and its success check, then attempt only this step.
Possible snag: The result from “Use the same chair height, foot marks, cadence, hand rule and provider-set load. Treat any change as a new test.” does not yet meet this declared check: Both session records match on every declared configuration field.
Correction: Return to the start of “Retest only in the same configuration”, reduce complexity or pace, and repeat only the part needed to satisfy: “Both session records match on every declared configuration field.”
Stop / get help: Stop immediately for chest pain, faintness, severe dizziness, unusual breathlessness or a new neurological symptom.
Correct versus incorrect execution
These accessible process diagrams are built from the tutorial’s own right/wrong teaching. They are not anatomical illustrations and do not add technique beyond the canonical tutorial.
Counting: Strength endurance checkpoint — Invalid repetitions inflate endurance. That changes valid repetitions or sustained time at a fixed submaximal task before the first technical failure. It is no longer the same test.
Correct / safer
Count only repetitions meeting range, cadence and support rules.
Wrong / riskier
Count every attempt that ends upright.
Responding to fatigue — Compensation changes the task. That changes valid repetitions or sustained time at a fixed submaximal task before the first technical failure. It is no longer the same test.
Correct / safer
Stop at the first missed execution rule.
Wrong / riskier
Use momentum and shortened range to keep going.
Pacing: Strength endurance checkpoint — Variable cadence changes the dose. That changes valid repetitions or sustained time at a fixed submaximal task before the first technical failure. It is no longer the same test.
Correct / safer
Follow the fixed cadence from the first repetition.
Wrong / riskier
Rush early and slow down later.
Naming the limiter — The cause changes what the score means.
Correct / safer
Separate local fatigue, breathlessness, pain and balance.
Wrong / riskier
Call every stop 'muscle fatigue'; it breaks the 'Breathe and keep the task local' execution rule.
Retesting: Strength endurance checkpoint — An easier configuration is not a clean retest.
Correct / safer
Match chair, foot marks, cadence and hand use.
Wrong / riskier
Use a higher chair and claim improvement.
Method-structure checklist
10 of 10 structural checks present
✓ Ordered, Power-specific instructions — present
✓ Every activity has a success check — present
✓ Materials or supplied records are declared — present
✓ Measurement or assessment rule is present — present
✓ Tutorial-specific troubleshooting is present — present
✓ Stopping or escalation boundary is present — present
✓ Every activity has an adjacent alternative — present
✓ Correct-versus-incorrect comparison is present — present
✓ Evidence context is bound to the Power record — present
✓ Planning metadata is present — present
The method-readiness band and presence checklist assess tutorial presentation and are separate from evidence quality for the underlying Power. They are automated editorial aids, not human approval.
Manual editorial sign-off: Pending. This tutorial must not display a human-approved state until an identified editor signs the exact content hash.