Revision 7T · Full Tutorial Edition · Updated 1 September 2026
PWR-159 · SUPERVISED full tutorial
Learn an actual 32-count dance phrase, one movement at a time
This supervised lesson supplies the movement instead of asking an instructor to invent it. You learn four exact eight-count blocks: side step-touch, a small forward-and-back pattern, planted weight shifts with low reaches, and a return to the start mark with a controlled finish. A qualified instructor checks the floor, support, range and personal adaptation. The learner then adds one chosen expressive quality without making the movement larger or riskier.
What you will produceUnder a qualified instructor, the learner performs the supplied 32-count phrase twice with the declared feet, directions and counts, uses the agreed support, responds to a stop cue and repeats the same phrase after at least 48 hours.
Method9 numbered Power-specific steps
Practice authorityFull method with qualified supervision where stated
Full step-by-step individual tutorial · TLU-PWR-159
Under a qualified instructor, the learner performs the supplied 32-count phrase twice with the declared feet, directions and counts, uses the agreed support, responds to a stop cue and repeats the same phrase after at least 48 hours.
Under direct instruction, learn and repeat the supplied low-travel 32-count phrase.
Choose a smaller range, seated version, support option and one expressive quality.
Stop at any time and decline touch, music, mirroring or performance.
Qualified help is required for
The instructor checks the floor, footwear, start marks, support, standing or seated version, range, teaching tempo and stop method.
The instructor decides whether any turn, jump, floor work, contact, faster tempo or larger travel is appropriate.
Never do this from the page alone
Add a lift, jump, spin, forced stretch, floor drop or unsupported balance challenge.
Continue through pain, dizziness, unstable balance, unsafe breathlessness or sensory overload.
Present this generic phrase as a sacred, ceremonial or community-owned dance.
2 · Get ready
Gather what you need and check the starting conditions
What you need
Three floor marks: START, RIGHT and FORWARD, placed by the instructor within the learner’s comfortable step range.
A stable support that cannot slide, positioned according to the instructor’s plan.
A spoken, signed, tapped or visual count at one count per second for initial learning.
Counts 1–8 — side step-touch: 1 step right; 2 touch left beside it; 3 step left; 4 touch right beside it; repeat the same pattern on 5–8.
Counts 9–16 — forward and return: 9 step the right foot a small distance forward; 10 touch left beside it; 11 step left back to the start line; 12 touch right beside it; repeat on 13–15, then on 16 place the right foot beside the left in a stable hip-width stance.
Counts 17–24 — planted shifts and low reaches: keep both feet planted; 17 shift gently right and reach the right hand low-right; 18 return to centre; 19 shift left and reach the left hand low-left; 20 return; repeat on 21–24.
Counts 25–32 — return and finish: 25 step right a small distance; 26 bring left to a stable hip-width stance; 27–28 pause; 29 step left back toward START; 30 bring right to hip width; 31 let the arms rest; 32 hold still or take the agreed support.
A phrase record with separate columns for block order, count, stable transfer, support, stop response, comfort and the learner’s chosen expressive quality.
Before you start
The instructor clears the floor and places START, RIGHT and FORWARD inside the learner’s comfortable range.
Test that the support cannot move and can be reached as planned. Use the seated version if continuous standing support would be unsafe.
Begin without music at one count per second.
The learner chooses a stop word or gesture and one optional expressive quality such as sustained, light or direct.
Do not start with pain, dizziness, unstable balance or another symptom that the responsible professional says requires review.
3 · The method
Follow these steps in order
Set the starting position
Stand at START with feet about hip width and arms comfortable, or take the instructor-approved seated position. Look toward FORWARD and locate the support.
Why: A repeatable start makes every direction and finish clear.
Check: START, RIGHT, FORWARD and the support can all be identified before count 1.
Learn counts 1–8
Count 1: step the right foot one comfortable foot-width toward RIGHT and transfer weight. Count 2: touch the left toes beside the right without loading them. Count 3: step left and transfer weight. Count 4: touch the right toes beside the left. Repeat on counts 5–8.
Why: Step-touch separates the weight-bearing foot from the free foot.
Check: Every odd count is a step, every even count is a touch, and no feet cross.
Learn counts 9–16
Count 9: step the right foot a small distance toward FORWARD. Count 10: touch left beside it. Count 11: step left back to the start line. Count 12: touch right beside it. Repeat on 13–15. On 16, place the right foot beside the left at hip width and share weight between both feet.
Why: The learner practises travelling forward and returning without a turn.
Check: The learner finishes count 16 facing forward in a stable stance at the start line.
Learn counts 17–24
Keep both feet planted. On 17 shift gently right and reach the right hand low-right; on 18 return to centre. On 19 shift left and reach the left hand low-left; on 20 return. Repeat right-centre-left-centre on 21–24.
Why: This adds direction and expression without additional stepping.
Check: Both feet remain down, the reaches stay inside the approved range and centre is recovered on every even count.
Learn counts 25–32
On 25 step right a small distance. On 26 bring the left foot to a stable hip-width stance. Pause on 27–28. On 29 step left toward START. On 30 bring the right foot to hip width. On 31 let the arms rest. On 32 hold still or take the agreed support.
Why: The phrase ends with a deliberate return and visible controlled stop.
Check: Count 32 finishes at START without a catch, extra step or moving support.
Join the four blocks
Speak, sign, tap or view counts 1–32 at one count per second. Stop after a wrong direction or unstable transfer, repair only that eight-count block, then begin the full phrase again.
Why: Repairing the exact block teaches more than repeatedly rushing through the whole phrase.
Check: All four blocks occur in order with no added turn, jump or crossover.
Rehearse the stop cue
On an unexpected instructor stop cue, complete only the current safe weight transfer, bring the free foot to the taught stable position and use the support if planned.
Why: The learner needs a rehearsed way to leave the phrase safely.
Check: The learner becomes stable within two counts without a hurried extra movement.
Add one expressive quality
Apply one chosen quality only to counts 17–24. Change timing texture, focus or softness inside the existing movement; do not increase reach, force or travel.
Why: Expression should be observable without replacing the taught safety boundaries.
Check: The learner or observer can name the chosen quality while feet, counts and range remain unchanged.
Perform and review
Complete two passes with rest between them. Score block order, counts, transfers, support and stop separately from the learner’s expressive result.
Why: Technical execution and artistic preference answer different questions.
Check: Two complete records exist and no taste judgement is used as a safety or body-worth score.
4 · Worked example
See the whole method used once
Scenario
Maya learns the supplied standing phrase with a stable chair available at START and a spoken count at one count per second.
Walkthrough
Maya points to START, RIGHT and FORWARD and confirms the stop word before moving.
On counts 1–8 she initially loads the touching foot on count 2. The instructor repeats only that block until step and touch are distinct.
On counts 9–16 she makes the forward step smaller and finishes count 16 at hip width.
On counts 17–24 both feet stay planted while she chooses a sustained low reach.
On counts 25–32 she returns to START and holds count 32 without an extra step.
After a rest, two full passes preserve the phrase. At least 48 hours later she attempts it before looking at the phrase card, then uses the card to repair one missed pause.
Result
Maya has learned and retained this specific adapted phrase. The result does not establish falls prevention, dance-form mastery or performance readiness.
5 · Right and wrong
Compare correct or safer execution with the common wrong version
Right and wrong comparison
Moment
Right / safer
Wrong / riskier
Why it matters
Count 2
Touch the left toes beside the right while weight stays on the right foot.
Transfer onto the left foot and make count 3 a hurried catch.
A touch and a weight-bearing step are different actions.
Forward block
Use a small forward step and return to the marked start line.
Keep travelling forward until the support is out of reach.
The supplied phrase has a fixed low-travel pathway.
Reach block
Keep both feet planted and reach only inside the approved range.
Turn, lean beyond the base or make the reach larger to look expressive.
Expression does not authorise a new balance task.
Finish
Return to START, place feet hip width and hold count 32.
Finish with crossed feet, a rebound step or a moving chair.
The controlled finish is part of the phrase.
Memory error
Stop, repair the affected eight-count block and try again after rest.
Invent a turn or jump to hide the missing counts.
An added movement changes both the lesson and its risk.
6 · Common mistakes
Spot the error and apply the correction
Common mistakes and corrections
Mistake
Fix
Step and touch are treated as the same weight transfer.
Say “STEP carries weight; TOUCH does not” during counts 1–16.
The forward step becomes larger on each pass.
Keep the FORWARD mark fixed and stop the foot at it.
The planted reach lifts a foot.
Reduce the reach until both feet remain comfortably down.
The learner rushes counts 29–32.
Practise only return, feet hip width, arms rest and hold.
Expression changes pathway or range.
Apply the quality only inside counts 17–24 with the same foot positions.
7 · Practice
Turn the steps into a usable skill
First session
Set START, RIGHT, FORWARD, support and stop cue.
Learn counts 1–8 until step and touch are visibly different.
Learn counts 9–16 until the learner returns to the start line and shares weight on count 16.
Learn counts 17–24 with both feet planted.
Learn counts 25–32 until count 32 is held without a catch.
Join 1–32 at one count per second and repair only the block that fails.
Rehearse one unexpected stop cue.
Complete two recorded passes with one chosen quality on counts 17–24.
Repeat plan
After at least 48 hours without looking at the phrase card, repeat the same instructor, floor marks, support and one-count-per-second tempo. Record the first delayed attempt before reviewing the card. Once delayed block order and controlled stop are intact, change only one item—music, expressive quality or visual orientation—under the instructor’s direction.
Progress when
Counts 1–32 preserve the supplied foot order and directions twice.
Every arrival is stable and support is used exactly as planned.
The stop cue produces stability within two counts.
The same phrase and finish are present after at least 48 hours.
The expressive quality changes no step, reach range or safety boundary.
Do not progress when
An arrival still requires a catch, crossed feet or an unplanned support grab.
Pain, dizziness, unsafe breathlessness, sensory overload or unstable balance appears.
The learner cannot distinguish a step from a touch.
Expression or speed changes the declared pathway.
8 · Check the result
Measure what changed
Technical reproduction and delayed retention of the supplied 32-count phrase, with expression recorded separately.
How: Record four block-order checks, count accuracy, stable transfers, planned support use, stop response and comfort for two immediate passes and the first delayed pass after at least 48 hours. Record the participant’s chosen expressive quality in a separate field.
Good result: Both immediate passes and the delayed pass preserve all four blocks, the declared counts, stable support and the count-32 finish; the stop cue is controlled and expression changes no movement boundary.
This does not prove: It does not establish falls prevention, fitness, cultural competence, choreography, general dance ability or performance readiness.
Self-check
On which counts do I step, and on which counts do I only touch?
Where exactly do counts 9 and 29 travel?
Do both feet remain planted throughout counts 17–24?
What must be true on count 32?
Can I respond to STOP without adding a turn, jump or hurried step?
9 · Stop, adapt or get help
Keep the safety boundary practical
Stop and get help
Stop for pain, dizziness, unstable balance, unsafe breathlessness, injury, sensory overload or an unsafe floor or support.
Seek clinical advice for a new fall, injury or symptom affecting ordinary movement.
Do not add speed, turns, jumps, floor work or larger travel when any supplied block remains unstable.
Accessibility and adaptations
Use the same 32 counts while seated: replace steps with right and left foot slides or toe taps, keep the planted shifts small and finish with both feet supported.
Use visual numbers, signed counts, taps, vibration or slower cue spacing.
Retain usual mobility or balance aids and record them as part of the phrase rather than removing them for a cleaner score.
Touch guidance requires explicit consent and may be replaced by mirroring or verbal direction.
10 · Evidence and limits
Why these instructions are here
primary research
Dance training research supports changes in action perception under specific conditions but does not establish universal transfer.
Progress is saved only in this browser on this device.
Step-by-step learner mode
Each activity includes its success check, a nearby accessible alternative and an “I’m stuck” correction path. Alternatives preserve the target where possible; when they change the task, Titan labels them as related rather than equivalent.
01
Set the starting position
Stand at START with feet about hip width and arms comfortable, or take the instructor-approved seated position. Look toward FORWARD and locate the support.
Why this step exists
A repeatable start makes every direction and finish clear.
Success check
START, RIGHT, FORWARD and the support can all be identified before count 1.
I’m stuck on this step
Reset: Re-read this authored instruction — “Stand at START with feet about hip width and arms comfortable, or take the instructor-approved seated position. Look toward FORWARD and locate the support.” — and its success check, then attempt only this step.
Possible snag: The result from “Stand at START with feet about hip width and arms comfortable, or take the instructor-approved seated position. Look toward FORWARD and locate the support.” does not yet meet this declared check: START, RIGHT, FORWARD and the support can all be identified before count 1.
Correction: Return to the start of “Set the starting position”, reduce complexity or pace, and repeat only the part needed to satisfy: “START, RIGHT, FORWARD and the support can all be identified before count 1.”
Stop / get help: Stop for pain, dizziness, unstable balance, unsafe breathlessness, injury, sensory overload or an unsafe floor or support.
02
Learn counts 1–8
Count 1: step the right foot one comfortable foot-width toward RIGHT and transfer weight. Count 2: touch the left toes beside the right without loading them. Count 3: step left and transfer weight. Count 4: touch the right toes beside the left. Repeat on counts 5–8.
Why this step exists
Step-touch separates the weight-bearing foot from the free foot.
Success check
Every odd count is a step, every even count is a touch, and no feet cross.
I’m stuck on this step
Reset: Re-read this authored instruction — “Count 1: step the right foot one comfortable foot-width toward RIGHT and transfer weight. Count 2: touch the left toes beside the right without loading them. Count 3: step left and transfer weight. Count 4: touch the right toes beside the left. Repeat on counts 5–8.” — and its success check, then attempt only this step.
Possible snag: Step and touch are treated as the same weight transfer.
Correction: Say “STEP carries weight; TOUCH does not” during counts 1–16.
Stop / get help: Stop for pain, dizziness, unstable balance, unsafe breathlessness, injury, sensory overload or an unsafe floor or support.
03
Learn counts 9–16
Count 9: step the right foot a small distance toward FORWARD. Count 10: touch left beside it. Count 11: step left back to the start line. Count 12: touch right beside it. Repeat on 13–15. On 16, place the right foot beside the left at hip width and share weight between both feet.
Why this step exists
The learner practises travelling forward and returning without a turn.
Success check
The learner finishes count 16 facing forward in a stable stance at the start line.
I’m stuck on this step
Reset: Re-read this authored instruction — “Count 9: step the right foot a small distance toward FORWARD. Count 10: touch left beside it. Count 11: step left back to the start line. Count 12: touch right beside it. Repeat on 13–15. On 16, place the right foot beside the left at hip width and share weight between both feet.” — and its success check, then attempt only this step.
Possible snag: The forward step becomes larger on each pass.
Correction: Keep the FORWARD mark fixed and stop the foot at it.
Stop / get help: Stop for pain, dizziness, unstable balance, unsafe breathlessness, injury, sensory overload or an unsafe floor or support.
04
Learn counts 17–24
Keep both feet planted. On 17 shift gently right and reach the right hand low-right; on 18 return to centre. On 19 shift left and reach the left hand low-left; on 20 return. Repeat right-centre-left-centre on 21–24.
Why this step exists
This adds direction and expression without additional stepping.
Success check
Both feet remain down, the reaches stay inside the approved range and centre is recovered on every even count.
I’m stuck on this step
Reset: Re-read this authored instruction — “Keep both feet planted. On 17 shift gently right and reach the right hand low-right; on 18 return to centre. On 19 shift left and reach the left hand low-left; on 20 return. Repeat right-centre-left-centre on 21–24.” — and its success check, then attempt only this step.
Possible snag: The planted reach lifts a foot.
Correction: Reduce the reach until both feet remain comfortably down.
Stop / get help: Stop for pain, dizziness, unstable balance, unsafe breathlessness, injury, sensory overload or an unsafe floor or support.
05
Learn counts 25–32
On 25 step right a small distance. On 26 bring the left foot to a stable hip-width stance. Pause on 27–28. On 29 step left toward START. On 30 bring the right foot to hip width. On 31 let the arms rest. On 32 hold still or take the agreed support.
Why this step exists
The phrase ends with a deliberate return and visible controlled stop.
Success check
Count 32 finishes at START without a catch, extra step or moving support.
I’m stuck on this step
Reset: Re-read this authored instruction — “On 25 step right a small distance. On 26 bring the left foot to a stable hip-width stance. Pause on 27–28. On 29 step left toward START. On 30 bring the right foot to hip width. On 31 let the arms rest. On 32 hold still or take the agreed support.” — and its success check, then attempt only this step.
Possible snag: The learner rushes counts 29–32.
Correction: Practise only return, feet hip width, arms rest and hold.
Stop / get help: Stop for pain, dizziness, unstable balance, unsafe breathlessness, injury, sensory overload or an unsafe floor or support.
06
Join the four blocks
Speak, sign, tap or view counts 1–32 at one count per second. Stop after a wrong direction or unstable transfer, repair only that eight-count block, then begin the full phrase again.
Why this step exists
Repairing the exact block teaches more than repeatedly rushing through the whole phrase.
Success check
All four blocks occur in order with no added turn, jump or crossover.
I’m stuck on this step
Reset: Re-read this authored instruction — “Speak, sign, tap or view counts 1–32 at one count per second. Stop after a wrong direction or unstable transfer, repair only that eight-count block, then begin the full phrase again.” — and its success check, then attempt only this step.
Possible snag: The result from “Speak, sign, tap or view counts 1–32 at one count per second. Stop after a wrong direction or unstable transfer, repair only that eight-count block, then begin the full phrase again.” does not yet meet this declared check: All four blocks occur in order with no added turn, jump or crossover.
Correction: Return to the start of “Join the four blocks”, reduce complexity or pace, and repeat only the part needed to satisfy: “All four blocks occur in order with no added turn, jump or crossover.”
Stop / get help: Stop for pain, dizziness, unstable balance, unsafe breathlessness, injury, sensory overload or an unsafe floor or support.
07
Rehearse the stop cue
On an unexpected instructor stop cue, complete only the current safe weight transfer, bring the free foot to the taught stable position and use the support if planned.
Why this step exists
The learner needs a rehearsed way to leave the phrase safely.
Success check
The learner becomes stable within two counts without a hurried extra movement.
I’m stuck on this step
Reset: Re-read this authored instruction — “On an unexpected instructor stop cue, complete only the current safe weight transfer, bring the free foot to the taught stable position and use the support if planned.” — and its success check, then attempt only this step.
Possible snag: The result from “On an unexpected instructor stop cue, complete only the current safe weight transfer, bring the free foot to the taught stable position and use the support if planned.” does not yet meet this declared check: The learner becomes stable within two counts without a hurried extra movement.
Correction: Return to the start of “Rehearse the stop cue”, reduce complexity or pace, and repeat only the part needed to satisfy: “The learner becomes stable within two counts without a hurried extra movement.”
Stop / get help: Stop for pain, dizziness, unstable balance, unsafe breathlessness, injury, sensory overload or an unsafe floor or support.
08
Add one expressive quality
Apply one chosen quality only to counts 17–24. Change timing texture, focus or softness inside the existing movement; do not increase reach, force or travel.
Why this step exists
Expression should be observable without replacing the taught safety boundaries.
Success check
The learner or observer can name the chosen quality while feet, counts and range remain unchanged.
I’m stuck on this step
Reset: Re-read this authored instruction — “Apply one chosen quality only to counts 17–24. Change timing texture, focus or softness inside the existing movement; do not increase reach, force or travel.” — and its success check, then attempt only this step.
Possible snag: Expression changes pathway or range.
Correction: Apply the quality only inside counts 17–24 with the same foot positions.
Stop / get help: Stop for pain, dizziness, unstable balance, unsafe breathlessness, injury, sensory overload or an unsafe floor or support.
09
Perform and review
Complete two passes with rest between them. Score block order, counts, transfers, support and stop separately from the learner’s expressive result.
Why this step exists
Technical execution and artistic preference answer different questions.
Success check
Two complete records exist and no taste judgement is used as a safety or body-worth score.
I’m stuck on this step
Reset: Re-read this authored instruction — “Complete two passes with rest between them. Score block order, counts, transfers, support and stop separately from the learner’s expressive result.” — and its success check, then attempt only this step.
Possible snag: The result from “Complete two passes with rest between them. Score block order, counts, transfers, support and stop separately from the learner’s expressive result.” does not yet meet this declared check: Two complete records exist and no taste judgement is used as a safety or body-worth score.
Correction: Return to the start of “Perform and review”, reduce complexity or pace, and repeat only the part needed to satisfy: “Two complete records exist and no taste judgement is used as a safety or body-worth score.”
Stop / get help: Stop for pain, dizziness, unstable balance, unsafe breathlessness, injury, sensory overload or an unsafe floor or support.
Correct versus incorrect execution
These accessible process diagrams are built from the tutorial’s own right/wrong teaching. They are not anatomical illustrations and do not add technique beyond the canonical tutorial.
Count 2 — A touch and a weight-bearing step are different actions.
Correct / safer
Touch the left toes beside the right while weight stays on the right foot.
Wrong / riskier
Transfer onto the left foot and make count 3 a hurried catch.
Forward block — The supplied phrase has a fixed low-travel pathway.
Correct / safer
Use a small forward step and return to the marked start line.
Wrong / riskier
Keep travelling forward until the support is out of reach.
Reach block — Expression does not authorise a new balance task.
Correct / safer
Keep both feet planted and reach only inside the approved range.
Wrong / riskier
Turn, lean beyond the base or make the reach larger to look expressive.
Finish — The controlled finish is part of the phrase.
Correct / safer
Return to START, place feet hip width and hold count 32.
Wrong / riskier
Finish with crossed feet, a rebound step or a moving chair.
Memory error — An added movement changes both the lesson and its risk.
Correct / safer
Stop, repair the affected eight-count block and try again after rest.
Wrong / riskier
Invent a turn or jump to hide the missing counts.
Method-structure checklist
10 of 10 structural checks present
✓ Ordered, Power-specific instructions — present
✓ Every activity has a success check — present
✓ Materials or supplied records are declared — present
✓ Measurement or assessment rule is present — present
✓ Tutorial-specific troubleshooting is present — present
✓ Stopping or escalation boundary is present — present
✓ Every activity has an adjacent alternative — present
✓ Correct-versus-incorrect comparison is present — present
✓ Evidence context is bound to the Power record — present
✓ Planning metadata is present — present
The method-readiness band and presence checklist assess tutorial presentation and are separate from evidence quality for the underlying Power. They are automated editorial aids, not human approval.
Manual editorial sign-off: Pending. This tutorial must not display a human-approved state until an identified editor signs the exact content hash.