Revision 7T · Full Tutorial Edition · Updated 1 September 2026
PWR-083 · SUPERVISED full tutorial
Complete a calibrated warm-versus-cool detection session under clinical control
Thermal discrimination is noticing a controlled change from a declared starting temperature at a named body site. A qualified clinician uses calibrated equipment, protects the skin, randomises trials and interprets thresholds. The learner still learns the response method, reports the first clear change and checks that the configuration stays constant. There is no home heat, ice or tolerance test.
What you will produceWith a qualified clinician, the learner completes familiarisation and a declared set of calibrated warm and cool trials, producing separate site-specific detection results with symptoms and equipment settings recorded.
Method6 numbered Power-specific steps
Practice authorityFull method with qualified supervision where stated
Full step-by-step individual tutorial · TLU-PWR-083
With a qualified clinician, the learner completes familiarisation and a declared set of calibrated warm and cool trials, producing separate site-specific detection results with symptoms and equipment settings recorded.
Any assessment related to neuropathy, pain, injury, medication, vascular disease or other clinical concern.
Never do this from the page alone
Use ice, heated metal, hot water, chemicals, electrical devices or improvised probes to find a threshold.
Continue until pain, tissue discomfort or tolerance, or compare sites using uncontrolled household objects.
2 · Get ready
Gather what you need and check the starting conditions
What you need
A clinic-approved calibrated thermal sensory device with a contact thermode—a temperature-controlled skin probe—and automatic safety limits.
Provider protocol, response button, skin inspection supplies and a settings/result sheet.
A stable supported position and the learner’s usual communication and mobility aids.
Before you start
Tell the clinician about skin damage, altered sensation, circulation issues, recent injury, medication changes and prior adverse reactions.
The clinician confirms the exact site is intact and suitable and explains warm detection, cool detection and the stop response.
Agree a plain stop word or button that ends a trial immediately without needing to justify it.
3 · The method
Follow these steps in order
Declare the clinical question
State whether the session concerns warm detection, cool detection or both, at which body site and for what legitimate clinical purpose.
Why: A threshold has meaning only in its declared clinical context.
Check: The record names question, site and clinician before contact.
Inspect and configure
The clinician inspects the site, verifies the device, sets the starting temperature, change rate and protective limits, and records them.
Why: Skin condition and stimulus parameters materially change the result and safety.
Check: Device identity, site, baseline and limits are written before trials.
Learn the first-change response
During non-scored familiarisation, press the button or say now at the first clear change toward warm or cool. Do not wait for a strong or painful sensation.
Why: The task measures detection, not endurance or certainty.
Check: The learner can explain and demonstrate the response before scored trials.
Complete randomised trials
Rest the tested part, keep eyes away from the display and respond once per provider-initiated trial. The clinician varies direction and catch trials according to the protocol.
Why: Random order and catch trials reduce prediction and response habit.
Check: Every trial has direction, response, temperature and any deviation recorded.
Pause and inspect
Between blocks, report after-sensation, pain, numbness, anxiety or uncertainty. The clinician checks the site and decides whether to continue.
Why: Repeated contact can change sensation or expose a problem that invalidates further testing.
Check: A continue or stop decision is documented after each block.
Interpret within the site and protocol
The clinician calculates separate warm and cool results, compares them only with suitable references or prior matched tests and explains measurement error.
Why: A single number is not tissue safety, pain or whole-body thermoregulation.
Check: The result names direction, site, protocol, uncertainty and non-claims.
4 · Worked example
See the whole method used once
Scenario
A clinician assesses warm and cool detection at the intact skin of the left forearm with a calibrated contact thermode.
Walkthrough
The clinician documents the forearm site, equipment, 32°C start and protocol limits after screening.
Sam practises pressing at the first slight warm or cool change and repeats the rule in his own words.
He completes a random block containing warm, cool and catch trials while the clinician records each response.
After the block Sam reports no pain or lingering sensation; the clinician inspects the skin and continues once.
The clinician reports separate warm and cool detection values with protocol variability and explains that they do not show burn safety.
Result
The session produces interpretable results for the left forearm under that device and protocol. It does not establish a safe household temperature, a pain threshold or general thermal ability.
5 · Right and wrong
Compare correct or safer execution with the common wrong version
Right and wrong comparison
Moment
Right / safer
Wrong / riskier
Why it matters
Stimulus control
Use calibrated equipment with clinician-set automatic limits.
Compare a freezer pack with a heated spoon at home.
Household stimuli have uncontrolled temperature, contact area and injury risk.
Response point
Respond at the first clear warm or cool change.
Wait until the sensation is intense or painful to be certain.
Waiting turns detection into a tolerance task and can increase harm.
Comparison
Compare only matched site, device and protocol results.
Compare a fingertip value with a forearm value as if site does not matter.
Body site strongly affects thermal sensitivity.
Interpretation
Report warm and cool detection separately.
Call a detection value proof that the skin is safe from heat or cold.
Detection, tissue injury and thermoregulation are different outcomes.
6 · Common mistakes
Spot the error and apply the correction
Common mistakes and corrections
Mistake
Fix
The learner predicts a regular alternation.
Use provider-randomised directions and catch trials.
The button is pressed only when certainty is high.
Rehearse first-clear-change responding and record uncertainty separately.
Starting temperature is omitted.
Copy the device baseline and rate onto every result sheet.
A changed body site is treated as a retest.
Label it as a new configuration and do not calculate change from the old site.
7 · Practice
Turn the steps into a usable skill
First session
Provider screening and skin check.
Two to four unscored familiarisation trials.
One short randomised scored block.
Symptom report, skin recheck and explanation of the result.
Repeat plan
Testing or practice frequency, trial count and any repeat are set by the qualified clinician for the declared purpose. A repeat uses the same site, device, starting temperature, rate, response rule and rest unless the change is explicitly the question.
Progress when
The learner responds to first change rather than intensity.
Catch trials and repeated estimates show acceptable provider-defined consistency.
The skin remains intact and there is no adverse sensation after the session.
Do not progress when
Pain, lingering heat or cold, skin change or distress occurs.
The device, site or protocol cannot be reproduced.
The learner or clinician is seeking a pain threshold, tolerance target or household safety limit.
8 · Check the result
Measure what changed
Provider-calculated warm and cool detection results at one named body site.
How: Use the calibrated device protocol to record response temperature for each valid trial, catch-trial behaviour, within-session spread and symptoms; the clinician applies the declared summary rule.
Good result: The provider judges familiarisation adequate and valid trials sufficiently consistent for the stated clinical question, without adverse skin or sensory effects.
This does not prove: It does not establish pain tolerance, burn or cold-injury safety, thermoregulatory control, diagnosis by itself or durable training.
Self-check
Can you state the exact site and starting temperature?
Did you respond at first change rather than pain?
Are warm and cool results reported separately?
Can you name what the detection result does not establish?
9 · Stop, adapt or get help
Keep the safety boundary practical
Stop and get help
End the stimulus immediately for pain, burning, prolonged after-sensation, numbness, blanching, redness, swelling or distress.
Do not test skin that is broken, infected, recently injured or newly altered in sensation until clinically reviewed.
Seek prompt medical advice for a new thermal-sensation loss, especially with weakness, spreading numbness, injury or vascular signs.
Accessibility and adaptations
Use a large response switch, spoken response or eye-gaze response with its timing method recorded.
Support the limb and change posture without changing the named contact site.
Offer breaks, predictable explanation and a support person; the learner retains the right to stop any trial.
10 · Evidence and limits
Why these instructions are here
primary research
Warm and cold perception thresholds differ across proximal and distal body regions, so the body site must be declared.
Progress is saved only in this browser on this device.
Step-by-step learner mode
Each activity includes its success check, a nearby accessible alternative and an “I’m stuck” correction path. Alternatives preserve the target where possible; when they change the task, Titan labels them as related rather than equivalent.
01
Declare the clinical question
State whether the session concerns warm detection, cool detection or both, at which body site and for what legitimate clinical purpose.
Why this step exists
A threshold has meaning only in its declared clinical context.
Success check
The record names question, site and clinician before contact.
I’m stuck on this step
Reset: Re-read this authored instruction — “State whether the session concerns warm detection, cool detection or both, at which body site and for what legitimate clinical purpose.” — and its success check, then attempt only this step.
Possible snag: A changed body site is treated as a retest.
Correction: Label it as a new configuration and do not calculate change from the old site.
Stop / get help: End the stimulus immediately for pain, burning, prolonged after-sensation, numbness, blanching, redness, swelling or distress.
02
Inspect and configure
The clinician inspects the site, verifies the device, sets the starting temperature, change rate and protective limits, and records them.
Why this step exists
Skin condition and stimulus parameters materially change the result and safety.
Success check
Device identity, site, baseline and limits are written before trials.
I’m stuck on this step
Reset: Re-read this authored instruction — “The clinician inspects the site, verifies the device, sets the starting temperature, change rate and protective limits, and records them.” — and its success check, then attempt only this step.
Possible snag: Starting temperature is omitted.
Correction: Copy the device baseline and rate onto every result sheet.
Stop / get help: End the stimulus immediately for pain, burning, prolonged after-sensation, numbness, blanching, redness, swelling or distress.
03
Learn the first-change response
During non-scored familiarisation, press the button or say now at the first clear change toward warm or cool. Do not wait for a strong or painful sensation.
Why this step exists
The task measures detection, not endurance or certainty.
Success check
The learner can explain and demonstrate the response before scored trials.
I’m stuck on this step
Reset: Re-read this authored instruction — “During non-scored familiarisation, press the button or say now at the first clear change toward warm or cool. Do not wait for a strong or painful sensation.” — and its success check, then attempt only this step.
Possible snag: The button is pressed only when certainty is high.
Correction: Rehearse first-clear-change responding and record uncertainty separately.
Stop / get help: End the stimulus immediately for pain, burning, prolonged after-sensation, numbness, blanching, redness, swelling or distress.
04
Complete randomised trials
Rest the tested part, keep eyes away from the display and respond once per provider-initiated trial. The clinician varies direction and catch trials according to the protocol.
Why this step exists
Random order and catch trials reduce prediction and response habit.
Success check
Every trial has direction, response, temperature and any deviation recorded.
I’m stuck on this step
Reset: Re-read this authored instruction — “Rest the tested part, keep eyes away from the display and respond once per provider-initiated trial. The clinician varies direction and catch trials according to the protocol.” — and its success check, then attempt only this step.
Possible snag: The learner predicts a regular alternation.
Correction: Use provider-randomised directions and catch trials.
Stop / get help: End the stimulus immediately for pain, burning, prolonged after-sensation, numbness, blanching, redness, swelling or distress.
05
Pause and inspect
Between blocks, report after-sensation, pain, numbness, anxiety or uncertainty. The clinician checks the site and decides whether to continue.
Why this step exists
Repeated contact can change sensation or expose a problem that invalidates further testing.
Success check
A continue or stop decision is documented after each block.
I’m stuck on this step
Reset: Re-read this authored instruction — “Between blocks, report after-sensation, pain, numbness, anxiety or uncertainty. The clinician checks the site and decides whether to continue.” — and its success check, then attempt only this step.
Possible snag: The result from “Between blocks, report after-sensation, pain, numbness, anxiety or uncertainty. The clinician checks the site and decides whether to continue.” does not yet meet this declared check: A continue or stop decision is documented after each block.
Correction: Return to the start of “Pause and inspect”, reduce complexity or pace, and repeat only the part needed to satisfy: “A continue or stop decision is documented after each block.”
Stop / get help: End the stimulus immediately for pain, burning, prolonged after-sensation, numbness, blanching, redness, swelling or distress.
06
Interpret within the site and protocol
The clinician calculates separate warm and cool results, compares them only with suitable references or prior matched tests and explains measurement error.
Why this step exists
A single number is not tissue safety, pain or whole-body thermoregulation.
Success check
The result names direction, site, protocol, uncertainty and non-claims.
I’m stuck on this step
Reset: Re-read this authored instruction — “The clinician calculates separate warm and cool results, compares them only with suitable references or prior matched tests and explains measurement error.” — and its success check, then attempt only this step.
Possible snag: The result from “The clinician calculates separate warm and cool results, compares them only with suitable references or prior matched tests and explains measurement error.” does not yet meet this declared check: The result names direction, site, protocol, uncertainty and non-claims.
Correction: Return to the start of “Interpret within the site and protocol”, reduce complexity or pace, and repeat only the part needed to satisfy: “The result names direction, site, protocol, uncertainty and non-claims.”
Stop / get help: End the stimulus immediately for pain, burning, prolonged after-sensation, numbness, blanching, redness, swelling or distress.
Correct versus incorrect execution
These accessible process diagrams are built from the tutorial’s own right/wrong teaching. They are not anatomical illustrations and do not add technique beyond the canonical tutorial.
Stimulus control — Household stimuli have uncontrolled temperature, contact area and injury risk.
Correct / safer
Use calibrated equipment with clinician-set automatic limits.
Wrong / riskier
Compare a freezer pack with a heated spoon at home.
Response point — Waiting turns detection into a tolerance task and can increase harm.
Correct / safer
Respond at the first clear warm or cool change.
Wrong / riskier
Wait until the sensation is intense or painful to be certain.
Comparison — Body site strongly affects thermal sensitivity.
Correct / safer
Compare only matched site, device and protocol results.
Wrong / riskier
Compare a fingertip value with a forearm value as if site does not matter.
Interpretation — Detection, tissue injury and thermoregulation are different outcomes.
Correct / safer
Report warm and cool detection separately.
Wrong / riskier
Call a detection value proof that the skin is safe from heat or cold.
Method-structure checklist
10 of 10 structural checks present
✓ Ordered, Power-specific instructions — present
✓ Every activity has a success check — present
✓ Materials or supplied records are declared — present
✓ Measurement or assessment rule is present — present
✓ Tutorial-specific troubleshooting is present — present
✓ Stopping or escalation boundary is present — present
✓ Every activity has an adjacent alternative — present
✓ Correct-versus-incorrect comparison is present — present
✓ Evidence context is bound to the Power record — present
✓ Planning metadata is present — present
The method-readiness band and presence checklist assess tutorial presentation and are separate from evidence quality for the underlying Power. They are automated editorial aids, not human approval.
Manual editorial sign-off: Pending. This tutorial must not display a human-approved state until an identified editor signs the exact content hash.