Revision 7T · Full Tutorial Edition · Updated 1 September 2026
PWR-129 · SELF GUIDED full tutorial
Generate varied mechanisms before judging solutions
Divergent ideation deliberately expands possible approaches before selection. This lesson uses a harmless cable-reach problem and a category-switch method. The learner establishes an ordinary silent baseline, searches six mechanism categories, marks duplicate mechanisms, delays evaluation and later applies the method to a new benign problem. Idea count, diversity, usefulness and originality stay separate.
What you will produceThe learner completes the six mechanism searches, separates duplicate variants from genuinely different mechanisms and identifies constraint-compliant candidates on a new benign brief.
Full step-by-step individual tutorial · TLU-PWR-129
The learner completes the six mechanism searches, separates duplicate variants from genuinely different mechanisms and identifies constraint-compliant candidates on a new benign brief.
Generate ideas for fictional or learner-owned benign problems using owned, licensed or public-domain inputs.
Stop before building any hazardous or consequential concept.
Qualified help is required for
Clinical, safety-critical, regulated, weapons, surveillance or high-consequence ideation.
Use of culturally governed knowledge or another person’s confidential problem.
Never do this from the page alone
Copy proprietary designs, living artists’ styles or restricted cultural material as raw idea stock.
Call fluency alone creativity or implementation readiness.
2 · Get ready
Gather what you need and check the starting conditions
What you need
Cable-reach brief with fixed function and safety constraints.
Six-column sheet labelled attach, contain, guide, counterbalance, retract and signal.
Timer, duplicate-mechanism marker and separate later evaluation page.
Before you start
State the function: keep a loose cable end reachable without changing the electrical device.
List hard constraints: no electrical modification, damage, trip hazard or powered mechanism.
Close examples during the baseline and set five minutes for silent generation.
3 · The method
Follow these steps in order
Capture an ordinary baseline
Generate silently for five minutes on a blank page and number every distinct idea without evaluating it.
Why: The baseline shows the learner’s default search before strategy cues.
Check: A timestamped list exists with judgement words crossed out.
Restate function and constraints
Rewrite what must be achieved and what is forbidden before adding ideas.
Why: A clear function preserves usefulness while the search expands.
Check: Every later idea can be checked against the same brief.
Search by mechanism
Use the six columns and add at least two ideas to each. Describe what physically changes, not just a product noun.
Why: Category switching reaches different regions of the solution space.
Check: All six mechanisms have two candidate descriptions.
Reverse one design assumption
Choose one non-safety assumption, such as “the cable must stay behind the desk,” reverse it and generate three consequences. Never reverse the hard electrical or trip-hazard limits.
Why: Assumption reversal can open a new search region while the real constraints remain intact.
Check: Three new ideas trace to the named reversal and still pass every hard constraint.
Break fixation
Mark repeated mechanisms, hide dominant examples and ask one environment-changing and one need-removing question.
Why: Surface variety can conceal the same underlying idea.
Check: At least two ideas use mechanisms absent from the baseline.
Use an incubation return
Write one unresolved mechanism question, leave the task for a low-demand interval and on return generate for three minutes before rereading the old list.
Why: A delayed return may loosen fixation, but it must be measured rather than treated as guaranteed insight.
Check: New-return ideas are marked separately and counted only when they add a mechanism or workable variation.
Cluster without selecting
Group ideas by mechanism, count distinct categories and flag only hard-constraint violations. Do not rank the survivors yet.
Why: Clustering measures diversity while keeping convergence separate.
Check: The sheet reports raw count, category count and duplicates.
Delay and transfer
After 48 hours, generate on the new problem “keep a bookmark from slipping,” using the same method without rereading the cable ideas first.
Why: A delayed unfamiliar brief tests method use rather than item memory.
Check: The new brief has its own count, categories and constraint pass.
4 · Worked example
See the whole method used once
Scenario
Jules works on keeping a charging-cable end reachable at a desk.
Walkthrough
His five-minute baseline produces six ideas, four of which are clips.
He applies the six columns and writes a tray, weighted guide, counterweight, spool, bright tag and other options.
He marks three clip variants as one mechanism rather than three categories.
The prompts “change the desk” and “remove the reaching need” produce a built-in channel and front charging point.
Two days later he uses the same category switch on the slipping-bookmark brief.
Result
Jules expands from three baseline mechanisms to six and transfers the search rule to a new brief. The result does not prove originality, value or implementation success.
5 · Right and wrong
Compare correct or safer execution with the common wrong version
Right and wrong comparison
Moment
Right / safer
Wrong / riskier
Why it matters
Generation
Suspend preference while producing varied mechanisms.
Reject every strange idea immediately.
Early selection narrows the search before alternatives appear.
Counting
Count distinct mechanisms and duplicate variants separately.
Count twelve clip shapes as twelve diverse ideas.
Surface wording inflates fluency without flexibility.
Examples
Generate independently before viewing examples.
Copy the first example and make cosmetic variations.
Early examples can anchor the search.
Proof
Test the method on a new benign brief.
Repeat the cable list faster.
Repeated-item fluency is not transfer.
6 · Common mistakes
Spot the error and apply the correction
Common mistakes and corrections
Mistake
Fix
Evaluation words enter the idea page.
Move “good,” “impossible” and ranking to a separate later sheet.
Categories become object names.
Name the mechanism—guide, store, pull, signal—not a brand or product.
Quantity rises while constraints disappear.
Keep function and hard constraints visible throughout.
Private or protected material enters the prompt.
Return to owned, generic, licensed or public-domain inputs.
7 · Practice
Turn the steps into a usable skill
First session
Run a five-minute blank baseline.
Generate two ideas in each of six categories.
Mark duplicate mechanisms.
Add environment-changing and need-removing ideas.
Store evaluation for a later session.
Repeat plan
Use one 20-minute session weekly for four weeks on different benign briefs. Delay evaluation until the next day and run a fresh-brief transfer on weeks two and four.
Progress when
All six mechanism prompts are attempted on two fresh briefs, with an honest empty mark when a prompt yields no valid idea.
Duplicate rate falls while hard-constraint compliance stays high.
Every retained candidate names its mechanism, useful function and hard-constraint check.
Do not progress when
The task becomes hazardous, regulated or consequential.
Idea generation uses confidential or culturally governed material.
The learner cannot stop or separate generation from evaluation.
8 · Check the result
Measure what changed
Distinct mechanism count on a new constrained brief.
How: Report raw ideas, unique mechanism clusters, duplicates, hard-constraint violations and independent usefulness ratings; preserve baseline and transfer separately.
Good result: The sheet shows two attempts in each declared search column or an explicit no-valid-idea entry, counts duplicate variants separately and yields at least one constraint-compliant mechanism absent from the initial baseline on a fresh brief. Counts describe the search; they are not a validated creativity pass score.
This does not prove: It does not establish objective creativity, real invention, implementation quality or transfer beyond similar benign tasks.
Self-check
What function stays fixed?
How many mechanisms, not wordings, are present?
Did examples appear only after independent work?
Was transfer tested on a genuinely new brief?
9 · Stop, adapt or get help
Keep the safety boundary practical
Stop and get help
Stop if the prompt involves harm, weapons, surveillance, clinical care or regulated systems.
Stop if sources are confidential, protected, culturally restricted or lack permission.
Seek domain and rights review before moving any concept toward real implementation.
Accessibility and adaptations
Use speech-to-text, drawing, objects or a scribe for idea capture.
Provide category prompts one at a time and allow longer equal generation time.
Use a non-visual text table for mechanism clustering.
10 · Evidence and limits
Why these instructions are here
primary research
A semantic retrieval strategy improved some divergent-thinking components in older adults but did not improve originality or alternate tasks uniformly.
Progress is saved only in this browser on this device.
Step-by-step learner mode
Each activity includes its success check, a nearby accessible alternative and an “I’m stuck” correction path. Alternatives preserve the target where possible; when they change the task, Titan labels them as related rather than equivalent.
01
Capture an ordinary baseline
Generate silently for five minutes on a blank page and number every distinct idea without evaluating it.
Why this step exists
The baseline shows the learner’s default search before strategy cues.
Success check
A timestamped list exists with judgement words crossed out.
I’m stuck on this step
Reset: Re-read this authored instruction — “Generate silently for five minutes on a blank page and number every distinct idea without evaluating it.” — and its success check, then attempt only this step.
Possible snag: Evaluation words enter the idea page.
Correction: Move “good,” “impossible” and ranking to a separate later sheet.
Stop / get help: Stop if the prompt involves harm, weapons, surveillance, clinical care or regulated systems.
02
Restate function and constraints
Rewrite what must be achieved and what is forbidden before adding ideas.
Why this step exists
A clear function preserves usefulness while the search expands.
Success check
Every later idea can be checked against the same brief.
I’m stuck on this step
Reset: Re-read this authored instruction — “Rewrite what must be achieved and what is forbidden before adding ideas.” — and its success check, then attempt only this step.
Possible snag: Quantity rises while constraints disappear.
Correction: Keep function and hard constraints visible throughout.
Stop / get help: Stop if the prompt involves harm, weapons, surveillance, clinical care or regulated systems.
03
Search by mechanism
Use the six columns and add at least two ideas to each. Describe what physically changes, not just a product noun.
Why this step exists
Category switching reaches different regions of the solution space.
Success check
All six mechanisms have two candidate descriptions.
I’m stuck on this step
Reset: Re-read this authored instruction — “Use the six columns and add at least two ideas to each. Describe what physically changes, not just a product noun.” — and its success check, then attempt only this step.
Possible snag: Categories become object names.
Correction: Name the mechanism—guide, store, pull, signal—not a brand or product.
Stop / get help: Stop if the prompt involves harm, weapons, surveillance, clinical care or regulated systems.
04
Reverse one design assumption
Choose one non-safety assumption, such as “the cable must stay behind the desk,” reverse it and generate three consequences. Never reverse the hard electrical or trip-hazard limits.
Why this step exists
Assumption reversal can open a new search region while the real constraints remain intact.
Success check
Three new ideas trace to the named reversal and still pass every hard constraint.
I’m stuck on this step
Reset: Re-read this authored instruction — “Choose one non-safety assumption, such as “the cable must stay behind the desk,” reverse it and generate three consequences. Never reverse the hard electrical or trip-hazard limits.” — and its success check, then attempt only this step.
Possible snag: The result from “Choose one non-safety assumption, such as “the cable must stay behind the desk,” reverse it and generate three consequences. Never reverse the hard electrical or trip-hazard limits.” does not yet meet this declared check: Three new ideas trace to the named reversal and still pass every hard constraint.
Correction: Return to the start of “Reverse one design assumption”, reduce complexity or pace, and repeat only the part needed to satisfy: “Three new ideas trace to the named reversal and still pass every hard constraint.”
Stop / get help: Stop if the prompt involves harm, weapons, surveillance, clinical care or regulated systems.
05
Break fixation
Mark repeated mechanisms, hide dominant examples and ask one environment-changing and one need-removing question.
Why this step exists
Surface variety can conceal the same underlying idea.
Success check
At least two ideas use mechanisms absent from the baseline.
I’m stuck on this step
Reset: Re-read this authored instruction — “Mark repeated mechanisms, hide dominant examples and ask one environment-changing and one need-removing question.” — and its success check, then attempt only this step.
Possible snag: The result from “Mark repeated mechanisms, hide dominant examples and ask one environment-changing and one need-removing question.” does not yet meet this declared check: At least two ideas use mechanisms absent from the baseline.
Correction: Return to the start of “Break fixation”, reduce complexity or pace, and repeat only the part needed to satisfy: “At least two ideas use mechanisms absent from the baseline.”
Stop / get help: Stop if the prompt involves harm, weapons, surveillance, clinical care or regulated systems.
06
Use an incubation return
Write one unresolved mechanism question, leave the task for a low-demand interval and on return generate for three minutes before rereading the old list.
Why this step exists
A delayed return may loosen fixation, but it must be measured rather than treated as guaranteed insight.
Success check
New-return ideas are marked separately and counted only when they add a mechanism or workable variation.
I’m stuck on this step
Reset: Re-read this authored instruction — “Write one unresolved mechanism question, leave the task for a low-demand interval and on return generate for three minutes before rereading the old list.” — and its success check, then attempt only this step.
Possible snag: Private or protected material enters the prompt.
Correction: Return to owned, generic, licensed or public-domain inputs.
Stop / get help: Stop if the prompt involves harm, weapons, surveillance, clinical care or regulated systems.
07
Cluster without selecting
Group ideas by mechanism, count distinct categories and flag only hard-constraint violations. Do not rank the survivors yet.
Why this step exists
Clustering measures diversity while keeping convergence separate.
Success check
The sheet reports raw count, category count and duplicates.
I’m stuck on this step
Reset: Re-read this authored instruction — “Group ideas by mechanism, count distinct categories and flag only hard-constraint violations. Do not rank the survivors yet.” — and its success check, then attempt only this step.
Possible snag: The result from “Group ideas by mechanism, count distinct categories and flag only hard-constraint violations. Do not rank the survivors yet.” does not yet meet this declared check: The sheet reports raw count, category count and duplicates.
Correction: Return to the start of “Cluster without selecting”, reduce complexity or pace, and repeat only the part needed to satisfy: “The sheet reports raw count, category count and duplicates.”
Stop / get help: Stop if the prompt involves harm, weapons, surveillance, clinical care or regulated systems.
08
Delay and transfer
After 48 hours, generate on the new problem “keep a bookmark from slipping,” using the same method without rereading the cable ideas first.
Why this step exists
A delayed unfamiliar brief tests method use rather than item memory.
Success check
The new brief has its own count, categories and constraint pass.
I’m stuck on this step
Reset: Re-read this authored instruction — “After 48 hours, generate on the new problem “keep a bookmark from slipping,” using the same method without rereading the cable ideas first.” — and its success check, then attempt only this step.
Possible snag: The result from “After 48 hours, generate on the new problem “keep a bookmark from slipping,” using the same method without rereading the cable ideas first.” does not yet meet this declared check: The new brief has its own count, categories and constraint pass.
Correction: Return to the start of “Delay and transfer”, reduce complexity or pace, and repeat only the part needed to satisfy: “The new brief has its own count, categories and constraint pass.”
Stop / get help: Stop if the prompt involves harm, weapons, surveillance, clinical care or regulated systems.
Correct versus incorrect execution
These accessible process diagrams are built from the tutorial’s own right/wrong teaching. They are not anatomical illustrations and do not add technique beyond the canonical tutorial.
Generation — Early selection narrows the search before alternatives appear.
Correct / safer
Suspend preference while producing varied mechanisms.
Wrong / riskier
Reject every strange idea immediately.
Counting — Surface wording inflates fluency without flexibility.
Correct / safer
Count distinct mechanisms and duplicate variants separately.
Wrong / riskier
Count twelve clip shapes as twelve diverse ideas.
Examples — Early examples can anchor the search.
Correct / safer
Generate independently before viewing examples.
Wrong / riskier
Copy the first example and make cosmetic variations.
Proof — Repeated-item fluency is not transfer.
Correct / safer
Test the method on a new benign brief.
Wrong / riskier
Repeat the cable list faster.
Method-structure checklist
10 of 10 structural checks present
✓ Ordered, Power-specific instructions — present
✓ Every activity has a success check — present
✓ Materials or supplied records are declared — present
✓ Measurement or assessment rule is present — present
✓ Tutorial-specific troubleshooting is present — present
✓ Stopping or escalation boundary is present — present
✓ Every activity has an adjacent alternative — present
✓ Correct-versus-incorrect comparison is present — present
✓ Evidence context is bound to the Power record — present
✓ Planning metadata is present — present
The method-readiness band and presence checklist assess tutorial presentation and are separate from evidence quality for the underlying Power. They are automated editorial aids, not human approval.
Manual editorial sign-off: Pending. This tutorial must not display a human-approved state until an identified editor signs the exact content hash.